Products Details

Current Location:HomePage> Products

Coatings

    Transfer foil is constructed of a lot of different special coating layers.

    While WASHIN manufacture our foil by self-developed materials, most foil manufacture get materials from other manufactures and stuff for products.

    Develop coating materials and manufacture original foil with them, and develop new one again.

    That iterative process gives us new chance to extend our technology.

    WASHIN has a big advantage in that we have an exploitation technology of special coating with full knowledge of converting.

    WASHIN COAT, a coating material for converting, attends to every need of foil development with a huge variety of product for each layer.

    Further more, we apply our technology of coating material for foil to a fuctional film to meet market needs more and more.

    The converting world is segmentalized and upgraded in the future.

    In such situation, WASHIN COAT proposes useful products and technology to the converting market.

    This catalog show only product lineup of WASHIN COAT.

    If you have any question about detailed product information, please feel free to contact us.



    WASHIN COAT TFH Series : Coating material for transfer foil


    It is developed for in-molding foil which is used for the molding system of simultaneous transcription.
    We assort a set of product required in release layer, UV hard coat layer, various middle layers, and sizing layer.
    Every product is able to select and combine according to your requirements.


    Use

    Type

    Product name

    Feature

    Solid content

    Release layer
    (one layer)

    two-pack

    TF - 1001

    good adherability to film

    10.0%

    CAT - 1

    75.0%

    one-pack

    TF - 1101

    gas cushion

    0.6%

    one-pack

    TF - 1201

    light release type

    5.0%

    one-pack

    TF - 1202

    good solvent resistance

    10.0%

    Release layer
    (two layer-1)

    one-pack

    TF - 1101

    gas cushion

    0.6%

    one-pack

    TF - 1102

    good surface slippery

    2.5%

    one-pack

    TF - 1103

    overstampability

    3.1%

    Release layer
    (two layer-2)

    one-pack

    TF - 1201

    light release type

    5.0%

    one-pack

    TF - 1202

    good solvent resistance

    10.0%

    one-pack

    TF - 1203

    better definition
    than TF - 1202

    14.3%

    Protective
    and
    coloring layer


    two-pack

    TFH - 2001

    foil for plastic / for coloring

    47.0%

    CAT - 2

    97.0%


    two-pack

    TFH - 2002

    foil for paper / for coloring

    50.0%

    CAT - 2

    97.0%

    Corrosion prevention layer

    one-pack

    TF - 4001

    corrosion prevention
    for tin metalizing

    5.0%

    Sizing layer

    one-pack

    TFH - 5001

    for styrene substrates
    (ABS / AS / PS)

    28.0%

    one-pack

    TFH - 5002

    36.0%

    one-pack

    TFH - 5003

    36.0%

    one-pack

    TFH - 5004

    for PET / UV thermal
    hardening varnish

    20.0%

    one-pack

    TFH - 5005

    for PMMA / PC / second surface foil

    34.0%

    one-pack

    TFH - 5006

    for PP substrates

    14.0%

    one-pack

    TFH - 5007

    11.0%

    one-pack

    TFH - 5008

    for general plastic

    16.0%

    one-pack

    TFH - 5009

    for multi-color printing foils

    19.0%

    one-pack

    TFH - 5010

    for UV / thermal hardening varnish

    31.0%

    one-pack

    TFH - 5011

    for PE / PVC substrates

    14.0%

    one-pack

    TFH - 5012

    for PET / substrates

    22.0%

    two-pack

    TFH - 5013 - 1

    for laminated PP / general coated paper

    45.0%

    TFH - 5013 - 2

    18.0%



    WASHIN COAT TFM Series : Coating material for special transfer foil


    It is developed for in-molding foil which is used for the molding system of simultaneous transcription.
    We assort a set of product required in release layer, UV hard coat layer, various middle layers, and sizing layer,
    Every product is able to select and combine according to your requirements.


    Use

    Type

    Product name

    Feature

    Solid content

    Release layer (one layer)

    two-pack

    TF - 1001

    film adhesion type

    10.0%

    CAT - 1

    75.0%

    one-pack

    TF - 1102

    good surface slipping property

    2.5%

    UV hard coat layer

    two-pack

    TFM - 2101

    heat-precure / post UV cure type

    53.0%

    CAT - 3

    0.5%

    one-pack

    TFM - 2102

    heat-precure / post UV cure type

    33.0%

    First primer layer

    two-pack

    TFM - 3101 A


    Improvement of adherability to hard coat layer
    < yellowing type>

    40.0%

    TFM - 3101 B

    37.0%


    two-pack

    TFM - 3102 A

    Improvement of adherability to hard coat layer

    40.0%

    TFM - 3102 B

    33.0%


    two-pack

    TFM - 3103 A


    Improvement of adherability to hard coat lager
    One coat application
    *with printability

    40.0%

    TFM - 3103 B

    35.0%

    Second primer layer

    one-pack

    TFM - 3201

    Good Printability

    29.0%

    Primer layer for metalization

    two-pack

    TFM - 3101 A

    yellowing type

    40.0%

    TFM - 3101 B

    37.0%

    two-pack

    TFM - 4101 A

    yellowing type

    35.0%

    TFM - 4101 B

    34.0%

    two-pack

    TFM - 4102 A

    non-yellowing type

    40.0%

    TFM - 4102 B

    25.0%

    Anchoring layer on metalization

    one-pack

    (TFM - 5101)

    good adherability to metalization

    30.0%

    one-pack

    (TFM - 5102)

    chlorine - free type

    20.0%

    Sizing layer

    one-pack

    TFM - 5101

    good adherability to substrates

    30.0%

    one-pack

    TFM - 5102

    chlorine - free type

    20.0%

    one-pack

    TFM - 5103

    chlorine - free type

    32.0%



    WASHIN COAT MP Series : Coating for special metalized PET Film


    It is developed for metalized PET film for metalic yarn.
    It is superior in adhesion to the surfece of PET film and that of metalization layer.
    It is anabled to use for purpose other than metalic yarn, because it has properties to endure hard circumstances.

    Example: launderability



    Metal

    Type

    Product name

    Feature

    Solid content

    Al

    one-pack

    MP - 6001

    for coloring

    45.0%

    one-pack

    MP - 6002

    for coloring

    46.0%

    one-pack

    MP - 6003

    corrosion prevention of aluminium materialization layer

    29.0%


    two-pack

    MP - 6004 A

    for deep color

    36.0%

    MP - 6004 B

    43.0%



    three-pack

    MP - 6005 A

    for metallic yarn / post-staining resistance

    36.0%

    MP - 6005 B

    43.0%

    CAT - 5

    30.0%


    two-pack

    MP - 6006 A

    low-formaldehyde

    55.0%

    MP - 6006 B

    34.0%

    three-pack

    MP - 6007 A

    for metallic yarn / high pressure staining resistance

    64.0%

    MP - 6007 B

    33.0%

    MP - 6007 C

    34.0%

    additive

    ADD - 1

    add slippery

    37.0%

    additive

    ADD - 2

    add slippery

    10.0%

    Ag

    one-pack

    MP - 6101

    transparent coat

    25.0%

    one-pack

    MP - 6102 White

    white coat

    16.0%


    two-pack

    MP - 6103 A

    transparent coat

    40.0%

    MP - 6103 B

    30.0%

    three-pack

    MP - 6104 A

    transparent coat

    15.0%

    MP - 6104 B

    22.0%

    CAT - 4

    50.0%

    three-pack

    MP - 6105

    white coat

    31.0%

    MP - 6105 White

    25.0%

    CAT - 5

    30.0%



    WASHIN COAT: UV Coatings for Cosmetic Containers


    Polyster UV Top Coating

                 Use

         Base  material

                 Product name

                Feature

    Finishing

    AS / ABS

    POLYSTER UV C-231 CLEAR

    hard coat

    POLYSTER UV C-252 CLEAR

    good stampability

    POLYSTER UV C-254 CLEAR

    semi-hard for plastic

    PET

    POLYSTER UV C-352 CLEAR

    semi-hard for PET

    Frost fiishing

    AS / ABS

    POLYSTER UV F-256 MAT

    frost finishing

    PET

    POLYSTER UV F-355 MAT

    frost finishing

    Special functionality

    AS / ABS

    POLYSTER UV C-721 CLEAR

    anti-pollution

    AS / ABS

    POLYSTER UV C-733 CLEAR

    anti-finger print


    Polyster UV Under Coating

                 Use

    Base material

                Product name

               Feature

    Basecoat
    for coloring

    -

    POLYSTER L-100 CLEAR BASE

    one-pack basecoat


    Primer for

    PP

    POLYSTER L-140 PP primer

    halogen - free

    PET

    POLYSTER L-130 PET primer

    primer for PET


    Polyster UV Coating for Metalization

            Use

    Base material

                Product name

             Feature


    Metalization

    AS / ABS

    POLYSTER UV C-872 CLEAR

    topcoat for metalization

    AS / ABS

    POLYSTER UV C-891 UNDERCOAT

    basecoat for metalization


    Polyster Thinner

    Use

    Base material

    Product name

    Feature

    Thinner
    for dilution

    -

    POLYSTER UV No.25 Thinner

    mild solvent type

    POLYSTER UV No.33 Thinner

    UV paint for PET

    POLYSTER No.101 Thinner

    dedicated / L-100 clear base

    POLYSTER No.141 Thinner

    dedicated / L-140 PP primer

    POLYSTER No.131 Thinner

    dedicated / L-130 PET primer


    previous item: BELAY
    av高清电影 | 成人电影 亚洲无码 欧美高清 东京热